OSMO - 610 Concrete Oil - Interior - Satin - 0.75 L
Product information
What to know before ordering.
Review the product details, selected option, and project requirements before adding it to your cart.
Osmo Concrete Oil is a clear interior treatment for absorbent concrete, screed, artificial stone, microporous natural stone and unglazed tile. It reduces dust and helps porous surfaces resist water, dirt and everyday stains while leaving a satin, slightly richer appearance.
At a glance
- Coverage: Up to approximately 538 sq ft per liter, per coat on smooth, absorbent surfaces
- Coats: 2 thin coats on untreated surfaces; usually 1 maintenance coat
- Drying time: Approximately 8–10 hours between coats
- Apply with: Flat Brush, Floor Brush, microfiber roller, applicator fleece or hand pad
- Use: Interior absorbent mineral surfaces only
- Color: 610 Clear Satin
How to apply
The surface must be clean, dry, absorbent and free of anything that blocks penetration. Newly installed tile or stone must release moisture from adhesives before sealing. Test the oil on the actual material - absorption and color change vary greatly.
Apply a very thin coat with a brush, microfiber roller or applicator fleece. Spread it thoroughly, then remove all excess with a pad or lint-free cloth. Let it dry for 8–10 hours with good ventilation and apply the second coat just as thinly. For maintenance over a sound oiled surface, one coat is normally enough.
Cleaning and maintenance
Use Osmo Spray Cleaner for routine cleaning. Refresh clean, dry areas with a small amount of Concrete Oil before the treatment wears through and allows liquids to penetrate.
Good to know
Concrete Oil permanently deepens the color of many surfaces and may change slip resistance. Very light stone can yellow slightly. It does not remove the acid sensitivity of marble or similar stone and will not penetrate glass, glazed tile or ceramic. A test area is essential.
Coverage by container
- 0.75 L can: Up to approx. 404 sq ft per coat