Osmo - 2K Wood Oil - One Coat - Oil with Hardener - Matte Finish
Choose the exact color, sheen, and container size above. The selected option controls the price and availability shown.
Product information
What to know before ordering.
Review the product details, selected option, and project requirements before adding it to your cart.
Osmo 2K Wood Oil is a two-component professional hardwax-oil for floors, stairs, furniture and demanding commercial interiors. It works on common woods as well as dense, oily or resinous species and provides the complete finish in one application. The hardener starts a limited working window, so the job needs to be planned before mixing.
At a glance
- Coverage: Approximately 430–540 sq ft per liter
- Mixing ratio: 8 parts oil to 1 part hardener by volume
- Working time after mixing: Approximately 3–4 hours
- Coats: 1 application for a matte finish; the current Osmo page also identifies 2 coats for satin
- Penetration time: Approximately 20–40 minutes before buffing
- Drying time: Approximately 12–24 hours with hardener, depending on conditions and current instructions
- Full cure: Approximately 6 days
Application methods
Mix the entire premeasured hardener thoroughly into the oil shortly before use. Do not thin and do not mix more than can be applied during the 3–4 hour working time.
Flat flooring: Spread a very thin application with an Osmo Double Blade Trowel or Professional Scraper. Wait 20–40 minutes, then buff evenly with a single-disc machine and clean white pad.
Chamfered flooring: Apply in sections with a microfiber roller without filling the joints, then buff as above.
Furniture and small areas: Spread a thin coat and work it into the wood with a hand applicator and white pad. Change the pad if excess finish causes streaks and continue buffing until the surface is even.
Leave the surface to dry with good ventilation. Mixed leftovers cannot be stored for later use. Follow Osmo's directions for allowing the mixture to finish reacting before closing a waste container, then dispose of it according to local rules.
Good to know
This is a professional two-component system, not a conventional ready-to-use oil. Accurate mixing, thin application, timing and mechanical buffing are important to the result.
Coverage by container
- 0.375 L (375 mL) kit: Approx. 161 to 203 sq ft
- 1 L kit: Approx. 430 to 540 sq ft